推广 热搜: 365bet体坛即时比分? /不锈钢制品? 布袋除尘器? 磁座钻? 美炊集成灶? 磁力钻? 规格齐全? 氧气增压泵? 旋转接头? 钣金加工?

温州冷库门制作 冷库门厂家

点击图片查看原图
?
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 浙江 杭州市
有效期至: 长期有效
最后更新: 2019-10-08 20:56
浏览次数: 0
询价
?
公司基本资料信息






详细说明
?? 冷库门采用优质材料经特殊处理后制作框架,外覆金属面板,一次性整体聚氨酯发泡。门扇与门框的接合处采用特制定形,且耐低温、强弹性的橡胶材料,两道平面形式密封、提高密封性能。四周设有低电压、高效率电加热器,防止门扇与门框冻结。门扇一侧设有安全开关,门在关闭时,如人或车辆在发生危险时,能在冷库内打开,避免事故发生。能适用于温度不低于-60 ℃的组合冷库及恒温库、恒温车间,在室内外温差大于80 ℃,库外空气温度大于80%时也能起到良好的隔热保温效果.
1. 平开门:冷库平开门,适用温度-35℃~40℃,规格尺寸可根据客户需要定制。定制门洞尺寸门板厚度可定制,可在门框内配加热丝,并采用进口门锁和铰链,保温性能好,开启自如。
2. 半埋门:冷库半埋门,简洁紧固的加工结构,以特殊压模工艺制造。内层隔热材料采用硬质聚氨酯,其测量值=0.025W/m2.k。厚度一般为100mm,120mm,150mm,三种容积重量约为40~50Kg/m2。四周橡胶密封件高度防油防算耐老化,均无需特殊工具即可方便装配和更换。
3. 平移门:平移冷库门保温门,具有保温密封性能好,手动开关门力矩小,开关门运行噪声小可,安全可靠等优点。保温门可按客户要求配置电动开门装置。
l2-160523162K5_232_169
?
The cold door adopts a high-quality material after special treatment to make a frame, overlay the metal panel, disposable whole polyurethane foaming. The joint of the door fan and the door frame adopts a special shape, and it is resistant to low temperature and strong elastic rubber materials. The two plane forms are sealed and the sealing performance is improved. It is surrounded by low voltage and high efficiency electric heaters to prevent door fans and door frames from freezing. There is a safety switch on the side of the door. When the door is closed, if the person or vehicle is in danger, it can be opened in the cold storage to avoid accidents. It can be used in combination cold storage with a temperature of not less than -60 °C, a constant temperature storage, and a constant temperature workshop. The temperature difference between indoor and outdoor is greater than 80 °C, and the air temperature outside the storage is greater than 80 %.
1. Open the door flat: Lengkuping opens the door, applicable temperature -35 °C ~ 40 °C, specifications can be customized according to customer needs. Custom door hole size door panel thickness can be customized, can be equipped with heating wire in the door frame, and the use of imported door locks and hinges, good thermal insulation performance, easy to open.
2. Semi-buried door: Cold storage semi-buried door, simple and compact processing structure, manufactured with special pressing molding process. The inner insulation material adopts rigid polyurethane and its measurement value = 0.025 W/m2. K. The thickness is generally 100mm, 120mm, 150mm, and the weight of the three volumes is about 40-50Kg/m2. The surrounding rubber seals are highly oil-proof and anti-aging, and they can be easily assembled and replaced without special tools.
3. Flat door: Translational cold door insulation door, with good thermal insulation seal performance, small manual opening and closing torque, small opening and closing noise, safety and reliability. Heat insulation door can be configured according to customer requirements electric door opening device.
更多>本企业其它产品
温州冷库门制作  冷库门厂家 杭州速冻隧道   速冻隧道厂家 温州冷风机厂家 冷风机直销 杭州冷库门设计 绍兴pu板生产 pu板厂家 台州冷凝器生产 冷凝器 厂家 绍兴冷风机生产 冷风机厂家 湖州冷库门设计定制 生产厂家
0相关评论
?
网站首页 ?|? 关于我们 ?|? 联系方式 ?|? 使用协议 ?|? 版权隐私 ?|? 网站地图 ?|? 排名推广 ?|? 广告服务 ?|? 积分换礼 ?|? 网站留言 ?|? RSS订阅 ?|? 违规举报
?